Skip to content
Now open / Accepting samples
Order a test

Independent peptide testing

Know what’s in your vial. And how much.

Independent HPLC testing for research peptides. Order a kit, send back the sealed vial, and get a certificate within 10 days of the lab receiving it.

For research use only. Not for human consumption.

Two analysts in lab coats, one at the computer of an HPLC system and one at an analytical balance, in a bright laboratory
Every answer starts with a sample.Reversed-phase HPLC

Services

Two tests. Different questions.

HPLC potency and purity testing, and bacterial endotoxin screening. Each result identifies the sample, the test performed, and the method used.

HPLC analysisPurity

How pure is the sample?

HPLC separates components in a sample. Purity analysis compares the target peak with the other peaks detected by the method.

Illustrative HPLC chromatogramA large target peak and smaller other peaks demonstrate separation over retention time. This is a schematic, not a sample result.Retention timeDetector responseTarget peakOther peak
Illustrative chromatogram. Not a measured sample.
What you’ll receiveChromatographic purity and method information.
Endotoxin assayScreening

Are bacterial endotoxins present?

A separate kinetic chromogenic assay quantifies bacterial endotoxin. The result is reported in EU/mL, with the method and the lowest standard of the run.

What you’ll receiveA sample-specific endotoxin result with context.

Identity and measured amount are reported where supported by the selected test and compound-specific method. Panels, accepted compounds, sample requirements and prices are on the tests page.

See tests and pricing

Reading the numbers

Purity and quantity aren’t the same.

A high purity percentage describes the detected composition. It does not, by itself, tell you the number of milligrams in the vial.

Quantitative testing answers that separate question by comparing a measured amount with the label claim.

An illustrative comparison
Label claim10.0 mg
Measured amount7.2 mg
72% of labeleven with 99.1% chromatographic purity

Hypothetical example to explain the difference. Not a result from our lab.

Sample report

What your report will tell you

The result should be easy to find, and the method behind it should be easy to check.

  • The sample identifier and declared compound
  • Results for the tests actually performed
  • The method and relevant reference information
  • A clear explanation of the findings and their limits

This illustrative format shows identity, purity, and quantitative results. Your report will reflect the tests included in your selected panel.

Testing has limits.

A result applies to the submitted sample. It does not certify a supplier or an entire batch. Purity and endotoxin results alone do not establish that a peptide is safe to use or appropriate for a person.

Illustrative example

Certificate of analysis

Declared compound
BPC-157
Specimen
EXAMPLE-001
Measured amount7.2 mg

Label claim: 10.0 mg

72% of label 28% below claim
Identity
Confirmed
Chromatographic purity
99.1%
Method shown
RP-HPLC / UV
Endotoxins
Not tested in this example

Example values only. Not an issued certificate or evidence of sample safety.

Questions

Ordering, samples, and results.

How does ordering work?

Order online and we post you a kit with a prepaid return label. Send back the sealed vial. Your card is saved when you order and charged once, only when the lab receives and accepts your sample.

What does testing cost?

Each panel’s price is on the tests and pricing page, and you see it before you order. Nothing is charged until the lab accepts your sample, and a sample we cannot test is not charged.

What should I send?

The full vial, sealed and unopened, as it came from the supplier. We cannot test an opened, reconstituted or partial sample. Write your order reference, the compound and the label claim in mg on the card in the kit, and pack the vial as the card describes.

How long does it take?

Your certificate is ready within 10 days of the lab receiving your sample. Allow a few more days for the post each way. We email you when it is ready.

Which compounds do you test?

The order form lists the compounds the lab runs most often. For anything else, choose Other and type the name as it is printed on the label.

Do you test for endotoxins?

Yes, as a separate assay alongside HPLC testing. Endotoxin screening does not replace sterility, heavy-metal, or broader microbial testing.

Do you ship outside the US?

Not yet. Kits ship to US addresses only.

Does testing mean a peptide is safe to use?

No. Amberline tests materials for research use only. A result answers the specific questions covered by the tests performed. It does not establish safety for human use, set a dose, or replace medical advice. Endotoxin screening is also different from sterility testing.

For background: FDA guidance on endotoxin testing (PDF).

Will my results be public?

No. You retrieve your certificate with your order reference and the access code we email you. There is no public library. We test chemical samples, not people, and collect no health information.